Before getting to know how to shatter into e liquid, first let us have a look at what Shatter actually is. Shatter, that is made using butane having a translucent texture and sap-like consistency, is a herbal concentrate. It can remain in its original state for a very long period of time at room temperature when it is stable. If it is not stable, sugaring will occur indicating that the product is unstable and is not appropriate for use. Shatter has a lot of different types. Some are dark colored that are made from the old trim material, helping in capturing more chlorophyll, nutrients and other plant materials, Since such a long time has passed the terpenes present in plants get the time to leave the plant material and escape before the processing has been completed.
Material that is freshly processed possesses a much lighter color and due to the presence of more terpenes, it has a pungent odor. The temperature at which the plant material was collected contributes largely to the final quality of the product. But the good news to consider is, it does not matter what is the physical state of the shatter, it works greatly in turning an E liquid to Vape.
Day by day, vaping cannabis, Shatter, waxes and other herbal concentrates are getting popular. And the reasons are quite obvious. It is due to the fact that you can vape anywhere you are. Also, vaping cannabis is a much healthier option for lungs. These facts make wax liquidizer a no brainer.
Methods to turn Shatter into Vape;
Given below are two simple methods to turn vaping cannabis, Shatter or any other concentrate into Vape Juice;
● 1/2 gram of Shatter
● Mixing glass vessel
● A Pot for boiling water
● Syringe to fill the cartridges
● EJ mix Formula
● Flavoring agents(natural terpenes)
Steps to follow:
● First of all, make a double boiler. Use a pot of water that is filled with a few inches of water and an empty glass vessel for mixing. The glass vessel should have a heavy bottom.
● At about 175 degrees(80 degree Celsius), bring the water to boil in the double boiler. A candy thermometer could be used to check whether the reading is accurate or not. Keep in mind that it would not matter if the reading is not perfect. If you don’t have the thermometer, just get the water heated to a point that bubbles start to form at the bottom of the pot.
● In the mixing glass vessel, add the concentrate and let it melt .
● At a ratio of 1ml of EJ mix to 1 gram of the shatter, add the EJMix Formula.
● Let the mixture get back to the same temperature as it was earlier.
● Stir to dissolve the tiny pieces of wax. For the oils having shatter or a sappy consistency, this step takes only a small time. For sugar wax, the time to melt may be 15 minutes or more.
(You can add flavour after this step)
● Using a syringe and a dispensing needle with blunt tip, extract the vape liquid and fill the disposable cartridges.
Let the wicks or coils of the cartridges fully soak in the oil.
● 1/2 gram of Shatter
● Shot glass
● Syringe to fill the
● Flavoring agents (natural terpenes)
Steps to follow:
● In a glass mixing vessel, add 1 gram of concentrate. A shot glass would also be a great option.
● Add about 35 drops or approximately 1 ml of EJ mix formula to the glass mixing vessel.
● Put the mixture down in the microwave for 10 seconds.
● Stir the mixture thoroughly until all of the wax pieces have completely dissolved. The oils having shatter or sappy consistency, this step takes only a small time. For sugar wax, the time to melt may be 15 minutes or more.
(you can add flavour after this step)
● Using a syringe and a dispensing needle with a blunt tip, extract the vape liquid and fill the disposable cartridges. Let the wicks or coils of the cartridges fully soak in the oil.
THE SHATTER IS TURNED INTO VAPE AND READY.
An author of Namaste UI, published several articles focused on blogging, business, web design & development, e-commerce, finance, health, lifestyle, marketing, social media, SEO, travel.
For any types of queries, contact us on info[at]namasteui.com.